HARDNESS TESTER /DUROMETER أجهزة قياس الصلابة - شركة الجوهري لأجهزة القياس العلمية

GY-1, GY-2, GY-3 Fruits Sclerometer (Hardness Tester)

Function: The sclerometer of fruit (have another name called the sclerometer of the fruit), Mainly to measure the hardness of fruits such as the apple, pear, strawberry, grape, etc.. It is suitable for the scientific research department of fruit tree, fruit company, the fruit tree farm, units such as the universities and colleges etc., to cultivating the improved variety, reap and store, transported and processed, etc. the detection of the hardness of fruit, thus judge the ripeness of the fruit. This instrument is small, light, reading is ocular, it is convenient to carry, is especially suitable for measuring at the scene. Can also assemble and use in forming a complete set in the special-purpose test board, can improve the precision while testing, suitable for measuring and using in the laboratory.
Specifications	GY-3	GY-2	GY-1
Range	Tip 1: 0.5-12KG/CM²	Tip: 0.5-4KG/CM²	Tip: 2-15KG/CM²
	Tip 2: 1-24KG/CM²
Resolution	Tip 1: 0.1
	Tip 2: 0.2
Accuracy	+-2%
Tip diameter	Tip 1) 11.1mm for range 0.5-12KG/CM² Tip 2) 7.9mm for range 1-24KG/CM²	3.5mm	3.5mm
Tip Depth	10mm
Dimension	150 x 55 x 30mm
Weight	300g

GY-4 Digital Fruits Sclerometer (Hardness Tester)

Function GY-4 Series fruit penetrometer special for inspecting the hardness of the fruits, such as banana, apple, pear, strawberry, grape and so on. Judging the harness and mature of the fruits will good for breed, deposited, export, transport, machining, etc. They are widely used for fruit research department, fruit company, fruit farm, college and so on.
Characters 1. High accuracy and resolution; 2. Peak hold function; 3. Peak automatic clearance function; 4. Tolerance limit(up and down limit); 5. Automatic power off function; 6. 3 units available 7. Full range 150% overload; 8. Reset acceleration of gravity function; 9. LCD screen turn direction function; 10. Large memory (896 value data); 11. Inductive background light; 12. With output signal to control motorized test stand; 13. RS-232C to USB Port;
Specifications 1. Load limit: 5kg (soft fruit)/20kg (hard fruit) 2. Load resolution: 0.001kg/0.01kg 3. Accuracy: ±0.5% 4. Unit: N, Kg, lb 5. Interface: RS-232-USB 6. Battery: Ni-Hi 7.2V 1800mAh 7. Power supply: Input 110~240V 50-60Hz 200mA Output9.4V 600mA 8. Pressure Diameter: 3.5mm 8mm 11mm 9. Pressure Depth: 10mm 10. Weight: 1.5kgs 11. Dimension: 245x66x36mm

Portable Water Hardness Tester EC915

1. Professional portable water hardness meter is equipped with a large backlit LCD display.
2. 2 to 5 points calibration from low to high concentrations.
3. Selectable multiple water hardness units, including the mmol/L, mg/L(CaCO3), mg/L(CaO), mmol/L(Boiler), mg/L(Ca), French degree, German degree and English degree.
4. Automatic Temperature Compensation provides accurate reading over the entire range.
5. Calibration Due Reminder prompts user to calibrate the meter regularly.
6. Stability indicator automatically shows current measurement status.
7. Auto-Hold function freezes stable reading for easy viewing and recording.
8. Manual temperature calibration improves the measurement accuracy of meter.
9. Help message as a operational guide that helps you quickly begin using the meter.
10. System menu can be used to set 7 parameters, including the number of calibration points, stability condition, hold function, auto-power off, etc.
11. Reset feature automatically resumes all parameters back to factory default options.
12. Expanded memory stores and recalls up to 500 readings.
13. Built-in real-time clock stamps stored data to meet GLP standard.
14. Stored data can be transferred into computer by USB communication interface.
15. Multi-mode power scheme (battery, power adapter, computer's USB port) ensures that use the meter smoothly.

Specifications:
1. Range: 0.05mmol/L~0.2mol/L; Range (CaCO₃): 0~19999mg/L; Range (CaO): 0~11220mg/L; Range (Boiler): 0~400mmol/L; Range (Ca): 0~8020mg/L; Range (German Degree): 0~1122°dH; Range (French Degree): 0~2000°f;
Range (English Degree): 0~1404°e
2. Accuracy: ±1% F.S
3. Calibration Points: 2 to 5 points
4. Calibration Solutions: 0.001, 0.01, 0.1mmol/L, 0.001, 0.01, 0.1mol/L
5. Temperature: Range: 0~105°C; Accuracy: ±0.5°C; Calibration Range: Measured value ±10°C
6. Temperature Compensation: 0~50°C
7. Compensation Mode: Manual or Automatic
8. Hold Function: Manual or Automatic
9. Stability Conditions: Low or High
10. Calibration Due: 0 to 31 days
11. Power Off: Manual or Automatic (10, 20, 30 minutes)
12. Reset Function
13. Memory: Stores up to 500 data sets
14. Output: USB Communication Interface
15. Power Requirements: 3 x 1.5V "AA" Batteries
16. Dimensions: 170(L) x 85(W) x 30(H)mm
17. Weight: 300g

Portable Water Hardness Tester YD300

Measuring Range:

0~10mmol/L; 0~401mg/L (Ca); 0~1000mg/L (CaCO3); 0~100ºfH (France Degree); 0~561mg/L (CaO); 0~56ºdH (German Degree); 0~20mmol/L (Boiler); 0~70ºeH (England Degree)

Temperature: 0 ~ 60.0ºC
Resolution: Hardness: 0.01/0.1; Temp: 0.1ºC
Accuracy: Hardness: ±5% FS; Temp: ±0.5ºC
ATC: 5 ~ 50ºC
Data Memory: 99 group
Buffer: B1: 2.00 x 10ˉ² mmol/L
B2: 2.00×10ˉ¹ mmol/L
B3: 2.00 mmol/L

Lab Water Hardness Tester YD200

Features:
●Bench top meter for measurement of water hardness (the total concentration of calcium ion and magnesium ion).
●Electrode adopts model 601-F water hardness combination electrode with patent structure. It consists of measurement electrode, reference electrode and temperature probe. Replaceable measuring head, steady potential, fast response, easy to use.
●Meter adopts intelligent chip design, automatic calibration, automatic temperature compensation, time display, data storage RS232 output, etc.
● Ability to switch among eight units: mmol/L, mg/L (CaCO3), mg/L (CaO), mmol/L (Boiler) and mg/L (Ca). Three options of three units: ºfH (France); ºdH (Germany); ºeH (UK) from WH-Link communication software.
●Equipped with B1, B2 and B3 calibration solution.
●Equipped with WH-Link communication software, connect testing data of meter to computer.

Specifications:
1. Measuring range: 0~10mmol/L; 0~401mg/L(Ca); 0~1000mg/L(CaCO3); 0~100ºfH (France Degree); 0~561mg/L(CaO); 0~56ºdH (German Degree); 0~20mmol/L (Boiler);0~70ºeH (England Degree)
2. Resolution: 0.01 and 0.1 water hardness units
3. Accuracy: ±5% FS
4. Temp. compensation: 5~50ºC automatic
5. Calibration Solution: B1 Calibration Solution: 2.00x10-2mmol/L; B2 Calibration Solution: 2.00x10-1mmol/L; B3 Calibration Solution: 2.00mmol/L
6. Temperature: Measuring range: 0~60ºC; Resolution: 0.1ºC; Accuracy: ±0.5ºC
7. Data storage: 128 groups
8. Content Storage: serial number of measuring value, measuring value, units, temperature, ATC or MTC, date, time and calibration way.
9. Communication Connector: RS232
10. Power: DC 9V
11. Dimension and weight: 160x190x70mm/750g

TA300 Serials Digital Durometer for Shore Hardness

FEATURES
Large LCD display for easy reading. With data output. On/off switch. Zero setting at any position.
Holding measured display values. Battery: 1.5V battery
Type A & Type D: Can be used to measure the Rubber, Hard-resin, Glass, Thermoplastic plastics, Printing plates, Fiber, etc. Type C: Can be used to measure the Hardness of Foam, Sponge, Shoes with incorporates material, etc.

Order No.	Range	Resolution	Contact point
TA300A	0-100HA	0.5HA	0.79mm diameter
TA300D	0-100HD	0.5HD	SR0.1mm
TA300C	0-100HC	0.5HC	SR2.5mm

Analog Durometer for Shore A Hardness

Model: TB300A (one needle)
Model: TB301A (2 needles to record peak value)
Function: The durometer is widely applied in the low and medium hardness plastic, all kinds of rubber, multi-dimensional fat, leather, wax hardness test etc. The product refers to ISO868 and the ISO7619 international standard production, conforms to GB/T531, JB6148 and the JJG304 standard. Character: One or Dual needle, after test the peak value, the driven needle will stop move, convenience the user to read (for TB301A). Needle indicates, easy to read, high accuracy. Handhold design, carry conveniently, handhold measure, also can be installed with match test stand. Specification: Dial Range: 0 ~ 100HA Needle stroke: 2.5 mm Measure range: 10 ~ 90HA Needle point size: Ф 0.79 mm Weight: 300g

Analog Durometer for Shore C Hardness

Model: TB300C (one needle)
Model: TB301C (2 needles to record peak value)
Function: SHORE C durometer is widely used in testing of various foam, sponge, microporous material and so on. It is available in HG/T2489-93. Specification: High resolution With facility, easy to operate Use by handy or by test stand(HLX-AC) Test range: 0-100 HW; Available test range: 10-90 HW Dimension: 1156025mm Stroke: 2.5 mm Tip dimension: SR2.5mm Net weight: 0.5Kgs

Analog Durometer for Shore D Hardness

Model: TB300D (one needle)
Model: TB301D (2 needles to record peak value)
Function: SHORE D is widely used to test hard rubber, hard colophony, grass, plastic, print board, fibre and so on. It is available in DIN 53505, ASTM D2240,ISO/R868, JIS R7215.executive standart - GB/T531-99, GB2411-80,HG/T2489-93, JJG304-2003. Specification: High resolution; With facility, easy to operate; Use by handy or by test stand (HLX-D); Test range: 0-100 HD; Available test range: 10-90 HD ; Dimension: 1156025(mm); Stroke: 2.5 mm; Tip dimension: SR0.1mm; Net weight: 0.5Kgs;

SYS-B Sand Mould Surface Hardness Tester

Features: It is used to determine the wet sand mould (core) surface hardness, for playing molding process to provide technical parameters. According to the size of the spring force and the stroke is the principle of linear relationship, the size of its stroke through a set of gear, the transmission of the rack by the surface pointer. The hardness of the surface of the sand B Type of unit is (g/mm2), but not in the habit of units but with the hardness to say. Because their values are related and consistent, both large (g/mm2), the corresponding hardness value is also large.
Specifications: 1. Compression stroke: 2.50mm 2. Maximum load: 980g 3. Pressure load: 50g 4. Head shape and size: Ball R12.70 5. Accuracy: When the pointer is at any value, the pressure of the pressure head is allowed to be 5%. When the pointer is returned to the 0 position, the tolerance is 1 degrees. 6. Outline dimension: 90 * 55 * 28mm
Operation: Adjust the 0 position, when the pointer is not in the 0 position, turn the adjusting ring, so that the pointer to the 0 bit. - use the hardness is pressed on the tested sand plane (hardness of the axis perpendicular to the surface of the sand), the hardness meter gauge plane and the measured sand plane close contact, the pointer stopped at a certain value, press the locking pin locking be locking, read out the determined value, then loosen the lock locking the pointer back to zero. In each test, 5 to 3 times, and then to calculate the average number, both the hardness value of the site.

HT-6510 Serials Shore Hardness

Product info: digital durometer for shore hardness testing pocket size model with integrated probe

Test scale: shore hardness

Standards: DIN53505, ASTMD2240, ISO7619, JISK7215

Parameters displayed: hardness result, average value, max. value

Measurement range: 0-100H

Measurement deviation: <1%H

Resolution: 0.1

Auto switch off

With optional RS232C interface

Operating conditions: 0℃ to 40℃

Power supply: 4x1.5V AAA (UM-4) battery

Battery indicator: low battery indicator

Dimensions: 162x65x38mm

Weight (not including probe):173g

Optional Accessories
1. Shore Hardness Tester Measurement Stand
2. Rubber Hardness Test Block (A / D Type )
3. USB, RS-232C data cable with software
4. Bluetooth data out put with software

Model	Indenter	Tested Materials	Hardness Value
HT-6510A	0.79 Truncated (Frustum) Cone	Soft Rubber, Elastomers, Natural Rubber Products, Neoprene, Resin, Polyester, Soft PVC, Leather etc.	20 ~ 90A
HT-6510B	R0.1 Cone	Middle Hard Rubber Materials, Typewriter Rollers, etc.	Above 90A, Below 20D
HT-6510C	0.79 Truncated (Frustum) Cone	Plastics and Middle Hard Rubber Materials	Above 90B, Below 20D
HT-6510D	R0.1 Cone	Fibre Plastics, Hard Rubber, Hard Plastic Materials, Plexiglas,Stiff Thermo Plastics, Formica, Print Roller, Vinyl-plate, Cellulose Acetate, etc.	Above 90A
HT-6510DO	R1.2 Spherical Radius	Plastics and Middle Hard up to Hard Rubber Materials	Above 90C, Below 20D
HT-6510O	R1.2 Spherical Radius	Soft Elastic Materials, Print Rollers, Middle Firm Textile Fabrics, Nylon, Orlon, Perlon, Rayon	Below 20DO
HT-6510OO	R1.2 Spherical Radius	Sponge- and Cellular Rubber, Foam Rubber, Silicone, Gel-like Materials	Below 20 O
HT-6510E	R2.5 Spherical Radius	Hard Sponge, EVA	Above 90DO, Below 20D

HT-6510MF Memory Form Shore Hardness Tester

Features:
It is special for memory foam hardness measurement. (memory foam is also known as slow rebound sponge, space zero pressure, space cotton, temper material, low rebound sponge material, visco plastic, used in high velocity of aerospace, aviation, equipment, high-end consumer goods.)
* It meets standards of DIN 53505, ISO 868, ISO 7619, ASTMD 2240, JISK7215.
* With average calculate function.
* Peak value deposit function.
* Under-voltage alarm function.
* Use “USB data output” and “RS-232 data output” to connect with PC.
* Provide “Bluetooth ™ data output” choice.

Specifications:
1. Parameters Displayed: Hardness Result, Average Value, Max. Value
2. Measurement Range: 0~100HMF
3. Measurement Deviation: <1HMF
4. Resolution: 0.1HMF
5. Spring Force: 455gf
6. Sensor Head Diameter: 25mm
7. Sensor Foot Diameter: 80mm
8. Auto Switch Off
9. Battery Indicator: Low Battery Indicator
10. Power Supply: 4 x 1.5V AAA Size (UM-4) Battery
11. Dimensions: 162 x 80 x 80mm
12. Weight: 250g

YD-1 Manual Tablet Hardness Tester

Tablet hardness testers are instruments for detecting breaking hardness of tablet.
Features:
• The tablet is loaded and pressed artificially.
• It has high accuracy press sensor and hardness data is displayed on LED.
• It tests tablet hardness continuously.
• Test data is displayed and locked automatically, so can test be reset and cycled.
• Automation: auto-test, auto-diagnose, auto-alarm.
Specifications:
• Hardness range: 2~199.9N
• Hardness accuracy: ±0.05%
• Moving distance of probe: 20mm
• Power: 220V/ 50Hz/ 10W or 110V/ 60Hz/ 10W
• Dimension: 320*200*100mm

YD-2 Automatic Tablet Hardness Tester with Printer

Tablet hardness testers are instruments for detecting breaking hardness of tablet.
Features:
• The tablet is loaded artificially and pressed automatically.
• There is high accuracy press sensor and hardness data is displayed on LED.
• It tests tablet hardness continuously. The biggest number is 100 pieces of a gang.
• Time of testing will be saved by directly measuring the diameter.
• Test data is displayed and locked automatically, so can test be reset and cycled.
• It can deal with and print out such data as: hardness of each tablet, the maximum value, the minimal value, the average value and the number of tablets.
• The parameters can be preset at any time. Either preset or real data is displayed on the LED.
• Automation: auto-test, auto-diagnose, auto-alarm.
Specifications:
• Hardness range (2~199.9)N
• Hardness accuracy: Max. ±0.05%
• Probe procession range: 3~40mm
• Test period: <20S/P
• Max number in each group: 100P
• Power 220V/ 50Hz/ 60W or 110V/ 60Hz/ 60W
• Dimension: 500*300*160mm

YD-3 Automatic Tablet Hardness Tester

Tablet hardness testers are instruments for detecting breaking hardness of tablet.
Features:
• The tablet is loaded artificially and pressed automatically.
• There is high accuracy press sensor and hardness data is displayed on LED.
• It tests tablet hardness continuously. The biggest number is 100 pieces of a gang.
• Time of testing will be saved by directly measuring the diameter.
• Test data is displayed and locked automatically, so can test be reset and cycled.
• It can deal with and print out such data as: hardness of each tablet, the maximum value, the minimal value, the average value and the number of tablets.
• The parameters can be preset at any time. Either preset or real data is displayed on the LED.
• Automation: auto-test, auto-diagnose, auto-alarm.
Specifications:
• Hardness range (2~199.9)N
• Hardness accuracy: Max. ±0.05%
• Probe procession range: 3~40mm
• Test period: <20S/P
• Max number in each group: 100P
• Power: 220V/ 50Hz/ 60W or 110V/ 60Hz/ 60W
• Dimension: 400*240*160mm

YD-1X Manual Tablet Hardness Tester

Tablet hardness testers are instruments for detecting breaking hardness of tablet.
Features:
• The tablet is loaded and pressed artificially.
• It has high accuracy press sensor and hardness data is displayed on LED.
• It tests tablet hardness continuously.
• Test data is displayed and locked automatically, so can test be reset and cycled.
• Automation: auto-test, auto-diagnose, auto-alarm.
Specifications:
• Hardness range: 2~200N; 0.2~20Kg
• Hardness accuracy: ±0.05%
• Moving distance of probe: 20mm
• Power: 220V/ 50Hz/ 10W or 110V/ 60Hz/ 10W
• Dimension: 320*200*100mm

YD-2X Automatic Tablet Hardness Tester

Tablet hardness testers are instruments for detecting breaking hardness of tablet.
Features:
• The tablet is loaded artificially and pressed automatically.
• There is high accuracy press sensor and hardness data is displayed on LED.
• It tests tablet hardness continuously. The biggest number is 100 pieces of a gang.
• Time of testing will be saved by directly measuring the diameter.
• Test data is displayed and locked automatically, so can test be reset and cycled.
• It can deal with and print out such data as: hardness of each tablet, the maximum value, the minimal value, the average value and the number of tablets.
• The parameters can be preset at any time. Either preset or real data is displayed on the LED.
• Automation: auto-test, auto-diagnose, auto-alarm.
Specifications:
• Hardness range: 2~200N; 0.2~20Kg
• Hardness accuracy: Max. ±0.05%
• Probe procession range: 3~40mm
• Test period: <20S/P
• Max number in each group: 100P
• Power: 220V/ 50Hz/ 60W or 110V/ 60Hz/ 60W
• Dimension: 400*240*160mm

YD-3X Automatic Tablet Hardness Tester with Printer

Tablet hardness testers are instruments for detecting breaking hardness of tablet.
Features:
• The tablet is loaded artificially and pressed automatically.
• There is high accuracy press sensor and hardness data is displayed on LED.
• It tests tablet hardness continuously. The biggest number is 100 pieces of a gang.
• Time of testing will be saved by directly measuring the diameter.
• Test data is displayed and locked automatically, so can test be reset and cycled.
• It can deal with and print out such data as: hardness of each tablet, the maximum value, the minimal value, the average value and the number of tablets.
• The parameters can be preset at any time. Either preset or real data is displayed on the LED.
• Automation: auto-test, auto-diagnose, auto-alarm.
Specifications:
• Hardness range: 2~200N; 0.2~20Kg
• Hardness accuracy: Max. ±0.05%
• Probe procession range: 3~40mm
• Test period: <20S/P
• Max number in each group: 100P
• Power 220V/ 50Hz/ 60W or 110V/ 60Hz/ 60W
• Dimension: 500*300*160mm

YPD-300D Tablet Hardness Tester

YPD-300D tablet hardness tester uses the international advanced sensor circuit, the electrical feed mechanism for automatic measurement. The tester is easy to operate, high-precision test and the number arguments show the measurement data with intuitively.
It’s with LCD (Liquid Crystal Display), realize the man-machine conversation. It has high accuracy, good repeatability. The reading is clear and measuring Kg-N can be set up in the software.
Specifications:
Max Dia. Of tablet: 30mm
Tablet pressure range: 1-30kg
Testing accuracy: ±0.5% of the Max. range
Power: 30W
Resolution: 0.01kg

YPD-300C Tablet Hardness Tester

YPD-300C tablet hardness tester using the international advanced sensor circuit, the electrical feed for automatic measurement. The tester is easy to operate, high-precision test and the number arguments show the measurement data with intuitively. the hereinbefore in order to hold the reliable basis of the tablet hardness VS coating, storage and transportation as well as provide with a strong basis for the reliability of measurement of tablets and tablet hardness of the collapse, release (Dissolution) of experimental data.
Technical Parameters:
Max Dia. Of tablet: 30mm
Tablet pressure range: 2~30kg
Testing accuracy: ±0.5% of max
distinguishes rate: 0.01kg
Input power: 30W
Noise: <50dB
Power: 220V±10% 50Hz
Size: 470×290×174mm
Net Weight: 15kgs

YPD-200C Tablet Hardness Tester

YPD-200C tablet hardness tester using the international advanced sensor circuit, the electrical feed for automatic measurement. The tester is easy to operate, high-precision test and the number arguments show the measurement data with intuitively. the hereinbefore in order to hold the reliable basis of the tablet hardness VS coating, storage and transportation as well as provide with a strong basis for the reliability of measurement of tablets and tablet hardness of the collapse, release( Dissolution) of experimental data.
Technical Parameters:
Max Dia. Of tablet: 2-30mm
Tablet pressure range: 1-25kg
Testing accuracy: 0.01kg
Testing accuracy: ±0.5% of max
distinguishes rate: 0.01kg
Input power: 30W
Noise: <50dB
Power: 220V±10% 50Hz
Size: 470 x 290 x 174mm
Net Weight: 15kgs

Superficial Rockwell Hardness Tester, Surface Rockwell Hardness Tester

Order Number: HT-20, HT-20T (For tube): Opening Size 25x25mm HT-21: Opening Size 50x50mm	HT-20	HT-20T	HT-21
FEATURES The superficial Rockwell hardness testers comply with the basic designing principles of Rockwell hardness testing in accordance with international standard ISO6508,American Standard ASTM E18 and ASTM E110. The hardness values can be read directly from the superficial Rockwell hardness testers after rapid and accurate operations. It can be considered as a non-destructive testing with very small indentations. This kind of testers can be used at site to test the finished or semi-finished work pieces piece by piece in batches.
Applications: All metals including iron, steel copper, aluminium, zinc, lead, tin, carburized steel, nitrided steel etc.
TECHNICAL PARAMETERS 1. Initial Test Force: 3kg 2. Total Test Force: 15kg, 30kg, 45kg (for HT-20T 15kg only) 3. Indenter: 120°diamond cone; φ1.588mm carbide ball; φ1.588mm steel ball (HT-20T only) 4. Accuracy: Meets ISO 6508, ASTM E18 5. Resolution: 0.5HR 6. Testing Range: HRN, HRT, HRW, HRX, HRY, etc. 15 scales.

Portable Rockwell Hardness Tester

Features:
1. Small, portable, accurate, light, weighing only 0.8kg, and can be easily operated like micrometer.
2. Works on practical hardness testing principle, having the same high testing precision as that of a bench type device. It has high testing accuracy complies with the ISO6508 standard, with an error of no more than 1.5HRC.
3. Comprising the main unit and holder, the hardness tester can either be used on the table or easily carried to workshops.
4. It is fast, taking only 10 seconds to finish a test.
5. Value can be conveniently read out.
6. Can be adopted for testing fine, long, small and irregular parts. suitable for testing finished or semi-finished batching processed workpiece one by one.
7. The internal and external surface hardness of steel tubes can be tested by the Rockwell portable hardness tester.
8. Suits parts with small bearing surface, in particular.
9. Initial testing force is 10kg, and its total testing force is 60kg, 100kg and 150kg.
10. Meet the standard standard GB/T230, ASTM E18.

SPECIFICATIONS
Model	Opening (mm)	Net Weight (Kg)		Gross Weight		Packing Size (mm)
		Tester	Stand	Tester	Stand	Tester	Stand
HT-15	25x25	0.8	1.5 Aluminum	2.8	1.8	330x255x150	232x215x148
HT-16	50x50	1.2		3.7		390x280x160
HT-17	100x50	1.5	4.5 Iron	5.2	4.9	510x380x180
HT-18	100x100	2.5		6.1
1. Initial test force 10kg, Total test force 60kg,100kg,150kg 2. Indenter: 120° diamond cone; 1.588mm carbide ball 3. Indication error Complies with ISO6508; Repeatability error Complies with ISO6508 4. Resolution 0.5HR 5. Testing range 15 scales, including HRA, HRB, HRC etc. 6. Application All common metal, such as steel, copper, aluminum, nickel, lead, tin, cemented steel, hard alloy, etc.

Standard Packing:
1. Tester
2. Stand
3. Indenter: 120°diamond cone; 1.588mm carbide ball
4. Flat and V anvil
5. Rockwell hardness block
6. Extension
7. Carrying case

Optional Parts:
1. Rockwell test block (HRA, HRB, HRC high, HRC medium, HRC low)
2. Carbide ball indenter: 3.175mm, 6.35mm, 12.7mm for more soft steel
3. Steel ball anvil 1/2", 1", 1-1/3"
4. Concave cylindrical anvil 1/2", 3/4", 1"
5. Convex cylindrical anvil 1/2", 3/4", 1"

Dual Brinell & Rockwell Hardness Tester

Order Number: HT-30: Opening Size 50x50mm HT-31: Opening Size 100x50mm HT-32: Opening Size 100x75mm HT-33: Opening Size 200x100mm HT-34: Opening Size 200x250mm HT-35: Opening Size 500x300mm
Features: Portable Brinell Rockwell hardness tester combines the function of Rockwell scale and Brinell scale, it has a more broad testing range. It is not only suitable for the Brinell scale's testing objectives which includes castings, forgings, steels and nonferrous metals, but also suitable for the Rockwell scale's testing objectives which includes steel, copper, aluminum, carburized layer and steel alloy. Portable Brinell Rockwell type including small-scale series, C-frame series. The testing objectives are different due to the different testing principles.
Specifications: 1. Rockwell Initial Test Force 10kg, Total test force 60kg,100kg,150kg Brinell Test Force: 62.5kg, 125kg, 187.5kg 2. Rockwell Indenter: 120°diamond cone; 1.588mm carbide ball Brinell Indenter: 2.5mm, 5mm carbide ball 3. Indication error Complies with ISO6508; Repeatability error Complies with ISO6508

Portable Webster Hardness Tester

INTRODUCTION
1. This instrument which can perform on-site hardness test on aluminum alloys, Copper, Brass and soft steel. The test result can be got with only a simple clamp. It is convenient, efficient and reliable.
2. Webster hardness tester is the preferred instrument for materials mechanical performance in accordance with American standard ASTM B647.
3. Used for quick test of hardness of Aluminum Profiles, Tube, Sheets, accessories and other soft metal. Especially suitable for quick, non-destructive on-site 100% final products qualification test.
4. Webster hardness tester can be also used for testing hardness of copper, brass and soft steel.

FEATURES
1. Indenter: Re-Engineered with advanced material and new production technology manufactured, higher hardness, long service life, good interchangeability.
2. Indicator Hand: High strength indicator hand, less likely to be bent by long-term using or mis-operation.
3. Dial Glass: High strength, high toughness, uneasy to be broken or scratched.
4. Handle: Forged aluminum alloy handle with fine anodized finishing, high resistance to abraision and stain.
5. Hardness Blocks: Tested by standard Rockwell hardness tester.
6. Stability: Stable full scale point, stable calibration point, indicator never glides.
7. Conversion: Results can be converted to Vickers, Rockwell and Brinell.

Model	Range & Resolution	Tested Materials	Opening Size (mm)	Pins	Spring
HT-01	0~20HW; 25~110HRE; 58~131HV @0.5HW	Aluminum
HT-02
HT-03
HT-04	0~20HW; 63~105HRF @0.5HW	Brass
HT-05	0~20HW; 63~105HRF @0.5HW	Brass
HT-06	0~20HW; 18~100HRE @0.5HW	Copper
HT-07	0~20HW; 18~100HRE @0.5HW	Copper
HT-08	0~20HW; 50~92HRB @0.5HW	Stainless Steel

STANDARD PACKING:
1. Tester
2. Standard hardness block
3. Spare indenter
4. Calibration wrench
5. Small screwdriver
6. Carrying case
7. Dial assembly

OPTIONAL ACCESSORIES
1. Indenter
2. Standard hardness block
3. Dial glass

Barcol Hardness Tester, Barcol Impressor

Order Number: HT-10 (934-1): For Aluminum, Aluminum alloys, Copper, Copper alloys, Fiber Reinforced Plastics and rigid plastics etc. HT-11 (935): For soft metals such as Lead and Tin; soft plastics etc. HT-12 (936): For Rubber, felt and leather etc.
1. Barcol Impressor is a kind of indention hardness tester. It uses a special shape indenter impressed into the specimen by a standard string pressure and measures the indentation depth to obtain hardness value. 2. Barcol Impressor is mainly applied in two areas: One is Aluminum fabrication industry, to test pure Aluminum, soft Aluminum alloys, thick Aluminum alloys, Aluminum belts, and Aluminum alloys extrusions, bars, castings, forgings and assembled Aluminum alloys parts (e.g. aluminum-alloy door & window, curtain wall etc.) Relevant standard is American standard ASTM B648-00 (Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor); the other is Fiber Reinforced Plastics industry, most Fiber Reinforced Plastics products are required to test Barcol hardness. Relevant Standard is American standard ASTM D2583-07 (Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor).
Features: 1.Easy to Use: Single hand operation; easy to use high efficiency able to make test at any site. 2.High Sensitivity: Barcol Impressor has 100 graduations. Its sensitivity is much higher than the Webster hardness tester. 3.Wide Testing Range: Used to test from very soft pure aluminum to very hard aluminum alloys. 4.Less Thickness Requirement: It can test on any workpieces with thickness more than 0.8mm. 5.No Supporting Required: It can test from only one side of the workpiece. It is unnecessary to move or support the workpiece. It is used to test very large and thick workpieces and assembly parts. 6.Easy Conversion: The test results can be converted to HB, HR, HV and HW easily through the conversion table. 7.High Quality Indenter: The indenter has very high hardness, long service life and good interchangeability
Technical Parameter: 1. Testing Range: 0 ~ 100HBa (equivalent to 25 ~ 145HBW) 2. Resolution: 0.5HBa 3. Indication Error: ±2HBa (42 ~ 48HBa); ±1HBa (81 ~ 88HBa) 4. Repeatability Error: ±2HBa (42 ~ 48HBa); ±1HBa (81 ~ 88HBa) 5. Net Weight: 0.5 kg
Standard Assembly 1. 2 Spare indenters 2. Standard hardness block (high) 3. Standard hardness block (low) 4. Calibration wrench 5. Leg 6. Carrying case	Optional Accessories 1. Spare indenters 2. Standard hardness block (high / low) 3. Dial glass 4. Flat leg

Barcol Hardness Tester, Barcol Impressor HM934-1 and HM934-1+

Applications:
The Digital Display Barcol Impressor HM934-1 is the Hand-held portable Indentation hardness tester, which is the lastest research and development of our company.
It use for measuring the hardness of: 1) Aluminum 2) Aluminum Alloys 3) Soft Metals 4) Composite Materials 5) Glass Steel; meet the standards: ASTM B648-00; ASTM HD2583-07;GB/T3854-2005.

Features:
1. The measuring result can be digital displayed, avoiding the visual errors.
2. Can measure the Hardness value (HBa).
3. Small size, lightweight, simple to use: press with one hand; can be used in any occasion.
4. With wide measuring range.
5. Can used for measuring the hardness of soft pure aluminum and hard aluminum alloys.
6. The valid test range is the equivalent of 25~150HB.
7. Don’t need measurement stand. Suitable for measuring the super large or ultra-thick work piece and assembling.
8. Have the maximum value retention function, recording the maximum hardness value during measuring.

Model	HM934-1+	HM934-1
Range	0~100Hba, Amount to 25~135HBW
Resolution	0.1HBa
Indication Error	81~88HBa ±1HBa
	42~48HBa ±2Hba
Repeatability Error	81~88HBa ±1.5HBa
	42~48HBa ±2.5HBa
Brinell Hardness	√	x
Vickers Hardness	√	x
Webster Hardness	√	x
Rockwell hardness	√	x
Maximum Hold	√	√
Average Calculation	√
Operating Condition	Temperature: 0~50°C
	Humidity: <80%RH
Power Supply	2 x 1.5 V AAA (UM-4) Battery
Weight	390g (Not Including Batteries)

HM-6561 Digital Leeb Hardness Tester

Typical Applications
* Die cavity of molds
* Inspection of bearing and other mass produced parts on a production line
* Failure analysis of pressure vessel, steam generator and other equipment
* Inspection of installed machinery, permanent parts of assembled systems and heavy work pieces.
* Testing surface of a small hollow space
* Material identification in the warehouse of metallic materials
* Rapid testing in large range and multi-measuring areas for large-scale work piece
Testing Features
* Palm size for narrow space.
* Test at any angle, even upside down.
* Direct display of hardness scales HRB, HRC, HV, HB, HS, HL.
* Large memory could store 250 groups including single measured value, impact direction, material and hardness scale etc.
* User recalibration function allowed.
* Can communicate with PC computer for statistics and printing by the optional cable.
* Manual or automatic shut down.
* Low battery indication.
Technical Specifications
Display: 12.5mm LCD with back light
Accuracy: Display error ±0.8% at LD=900
Measuring range: 200-900L
Conversion: HL-HRC-HRB-HB-HV-HSD
Materials: 9 different common materials
With RS232C interface
Memory: 250 data can be stored and re-readable
Impact device: D Type and weight 75g
Power supply: 2x1.5V AAA size battery
Dimension: 146×65×36mm
Weight: 130g (not including batteries)
Working temperature: -10℃～＋50℃

Portable Hardness Tester HL200 Manual

Model HL200 hardness tester is used widely in on-site hardness test, its menu driven, with large memory capacity, with USB port connect with computer, software to store and analysis its test data, optional mini-printer for on-site printing.

Standard Deliveries:

Main unit 1
D type impact device 1
Test block with HLD value 1
Cleaning brush 1
Instruction manual 1
Carrying case 1
Data Pro software 1
Cables 1

Measuring Range: HLD(170-960)
Impact Directions: up, down, horizontal, slanting up, slanting down
Measuring materials: steel and cast steel, cold work tool steel, stainless steel, grey cast iron, nodular cast iron, cast aluminium alloys, brass (copper-zinc alloys), Bronze (copper-aluminium alloys/copper-tin alloys), wrought copper alloys
Hardness scales: Leeb, Brinell, Rockwell A,B,C, Vicker, Shore
Display: 128*64 digital matrix LCD
Memory: 500 group (32 every group)
Work voltage: 3V( 2 AA alkaline batteries)
Interface port: USB
Dimensions: 132*76*33mm
Weight: 345g
Continuous working period: 50 hours (with backlight off)

Impact Device	Hardness value of Leeb/ Standard hardness block	Error of displayed value	Repeatability of displayed value
D	760±30HLD 530±40HLD	±6 HLD ±10 HLD	6HLD 10HLD
DC	760±30HLD 530±40HLD	±6 HLDC ±10 HLDC	6HLD 10HLD
DL	878±30HLD 736±40HLD	±12 HLDL	12HLDL
D+15	766±30HLD 544±40HLD	±12 HLD+15	12HLD+15
G	590±40HLD 500±40HLD	±12 HLG	12HLG
E	725±30HLD 508±40HLD	±12 HLE	12HLE
C	822±30HLD 590±40HLD	±12 HLC	12HLC

Portable Hardness Tester MH210 Manual

Model MH210 hardness tester is develop model of HL200, its in durable metal case, hardness scales are convertable among hardness units: HRB, HRC, HV, HB, HS, HL; attachable thermal mini-printer, fast on-site print; software data and upper lower limits setting and sound alarm; large storage capacity.

Standard Deliveries:

Main unit 1
D type impact device 1
Test block with HLD value 1
Cleaning brush 1
Instruction manual 1
Carrying case 1
Data Pro software 1
Cables 1

Measuring Range: HLD(170-960)
Impact Directions: up, down, horizontal, slanting up, slanting down
Measuring materials: steel and cast steel, cold work tool steel, stainless steel, grey cast iron, nodular cast iron, cast aluminium alloys, brass (copper-zinc alloys), Bronze (copper-aluminium alloys/copper-tin alloys), wrought copper alloys
Hardness scales: Leeb, Brinell, Rockwell A,B,C, Vicker, Shore
Display: 128*64 digital matrix LCD
Memory: 500 group (32 every group)
Work voltage: 3V( 2 AA alkaline batteries)
Interface port: USB
Dimensions: 132*76*33mm
Weight: 345g
Continuous working period: 50 hours (with backlight off)

Impact Device	Hardness value of Leeb/ Standard hardness block	Error of displayed value	Repeatability of displayed value
D	760±30HLD 530±40HLD	±6 HLD ±10 HLD	6HLD 10HLD
DC	760±30HLD 530±40HLD	±6 HLDC ±10 HLDC	6HLD 10HLD
DL	878±30HLD 736±40HLD	±12 HLDL	12HLDL
D+15	766±30HLD 544±40HLD	±12 HLD+15	12HLD+15
G	590±40HLD 500±40HLD	±12 HLG	12HLG
E	725±30HLD 508±40HLD	±12 HLE	12HLE
C	822±30HLD 590±40HLD	±12 HLC	12HLC

Portable Hardness Tester MH180

Model MH180 hardness tester is used widely in on-site hardness test, its menu driven, with large memory capacity, with USB port connect with computer, optional mini-printer for on-site printing.

Standard Deliveries:

Main unit 1
D type impact device 1
Test block with HLD value 1
Cleaning brush 1
Instruction manual 1
Carrying case 1
Cables 1

Measuring Range: HLD(170-960)
Impact Directions: up, down, horizontal, slanting up, slanting down
Measuring materials: steel and cast steel, cold work tool steel, stainless steel, grey cast iron, nodular cast iron, cast aluminium alloys, brass (copper-zinc alloys), Bronze (copper-alluminium alloys/copper-tin alloys), wrought copper alloys
Hardness scales: Leeb, Brinell, Rockwell A,B,C, Vicker, Shore
Display: 128*64 digital matrix LCD
Memory: 500 group(32 every group)
Work voltage: 3V( 2 AA alkaline batteries)
Interface port: RS232
Dimensions: 132*76*33mm
Weight: 345g
Continuous working period: 50 hours (with backlight off)

Impact device	Hardness value of Leeb standard hardness block	Error of displayed value	Repeatability of displayed value
D	760Â±30HLD 530Â±40HLD	Â±6 HLD Â±10 HLD	6HLD 10HLD
DC	760Â±30HLD 530Â±40HLD	Â±6 HLDC Â±10 HLDC	6HLD 10HLD
DL	878Â±30HLD 736Â±40HLD	Â±12 HLDL	12HLDL
D+15	766Â±30HLD 544Â±40HLD	Â±12 HLD+15	12HLD+15
G	590Â±40HLD 500Â±40HLD	Â±12 HLG	12HLG
E	725Â±30HLD 508Â±40HLD	Â±12 HLE	12HLE
C	822Â±30HLD 590Â±40HLD	Â±12 HLC	12HLC

Portable Hardness Tester MH310

Advantages
● Small volume with light weight, it is convenient for taking. Its outline dimensions are 212mm×80mm×32mm.
● Large screen(128×64 dot matrix LCD), showing all functions and parameters.
● Test at any angle, even upside down.
● Wide measuring range. It can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC, HV, HB, HS, HL and three types of strength values immediately.
● Seven impact devices are available for special application. Automatically identify the type of impact devices.
● Large capacity memory could store 500 groups (Relative to average times32～1 ) information including single measured value, mean value, testing data, impact direction, impact times, material and hardness scale etc.
● Upper and lower limit can be preset. It will alarm automatically when the result value exceeding the limit.
● Battery information indicates the rest capacity of the battery and the charge status.
● User calibration function.
● USB port with the PC humanity multi-functions data proceeding software.
● Original imported high speed thermal printer support the immediate printing function. It can save data permanently.
● NI-MH rechargeable battery as the power source. With rechargeable battery, charging for three hours, it can use for two months. Charge circuit integrated inside the instrument. Continuous working period of no less than 150 hours (EL off and no printing).
● Auto power off to save energy.
● Excellent after-sale service system for high quality products--two years guarantee and all life maintenance. Easy to buy and comfortable to use.
Main Application
● Die cavity of molds
● Bearings and other parts
● Failure analysis of pressure vessel, steam generator and other equipment
● Heavy work piece

Technical Specifications
Measuring range: HLD (170~960) HLD
● Measuring direction: 360°
● Hardness Scale: HL, HB, HRB, HRC, HRA, HV, HS
● Display: dot matrix LCD, 128×64 dots
● Data memory: 500 groups max. (relative to impact times 32~1)
● Printing paper: width is (57.5±0.5)mm, diameter is 30mm
● Battery pack: 6V NI-MH
● Battery charger: 9V/500mA
● Continuous working period: about 150 hours (With backlight off, no printing)
● Communication interface: USB1.1
● Outline dimensions: 212mm×80mm×32mm

Error and repeatability of displayed value:

No.	Impact Device Type	Hardness value of Leeb/ standard hardness block	Error of displayed value	Repeatability
1	D	760±30HLD	±6 HLD	6HLD
1	D	530±40HLD	±10 HLD	10HLD
2	DC	760±30HLD 530±40HLD	±6 HLDC ±10 HLDC	6HLD 10HLD
3	DL	878±30HLD 736±40HLD	±12 HLDL	12HLDL
4	D+15	766±30HLD 544±40HLD	±12 HLD+15	12HLD+15
5	G	590±40HLD 500±40HLD	±12 HLG	12HLG
6	E	725±30HLD 508±40HLD	±12 HLE	12HLE
7	C	822±30HLD 590±40HLD	±12 HLC	12HLC

Configuration

	No.	Item	Quantity	Remarks
Standard Configuration	1	Main unit	1
	2	D type impact device	1	With cable
	3	Standard test block	1
	4	Cleaning brush (I)	1
	5	Small support ring	1
	6	Battery Charger	1	9V 500mA
	7	Paper for printing	1
	8	Manual	1
	9	Instrument package case	1
Optional Configuration	11	Cleaning brush (II)	1	For use with G type impact device
	12	Other type of impact devices and support rings		Refer to Table 3 and Table 4 in the appendix.
	13	DataPro software	1
	14	Communication cable	1

Portable Hardness Tester MH320

Advantages
● Small volume with light weight, it is convenient for taking. Its outline dimensions are 212mm×80mm×32mm.
● Large screen(128×64 dot matrix LCD), showing all functions and parameters.
● Test at any angle, even upside down.
● Wide measuring range. It can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC, HV, HB, HS, HL and three types of strength values immediately.
● Seven impact devices are available for special application. Automatically identify the type of impact devices.
● Large capacity memory could store 500 groups (Relative to average times32～1 ) information including single measured value, mean value, testing data, impact direction, impact times, material and hardness scale etc.
● Upper and lower limit can be preset. It will alarm automatically when the result value exceeding the limit.
● Battery information indicates the rest capacity of the battery and the charge status.
● User calibration function.
● USB port with the PC humanity multi-functions data proceeding software.
● Original imported high speed thermal printer support the immediate printing function. It can save data permanently.
● NI-MH rechargeable battery as the power source. With rechargeable battery, charging for three hours, it can use for two months. Charge circuit integrated inside the instrument. Continuous working period of no less than 150 hours (EL off and no printing).
● Auto power off to save energy.
● Excellent after-sale service system for high quality products---two years’ guarantee and all life maintenance. Easy to buy and comfortable to use.
Main Application
● Die cavity of molds
● Bearings and other parts
● Failure analysis of pressure vessel, steam generator and other equipment
● Heavy work piece
● The installed machinery and permanently assembled parts
● Testing surface of a small hollow space
● Material identification in the warehouse of metallic materials
● Rapid testing in large range and multi-measuring areas for large-scale work piece

Technical Specifications
● Measuring range: HLD 170~960
● Measuring direction: 360°
● Hardness Scale: HL, HB, HRB, HRC, HRA, HV, HS
● Display: dot matrix LCD, 128×64 dots
● Data memory:500 groups max. (relative to impact times 32~1)
● Printing paper: width is (57.5±0.5)mm, diameter is 30mm
● Battery pack: 6V NI-MH
● Battery charger: 9V/500mA
● Continuous working period: about 150 hours (With backlight off, no printing)
● Communication interface: USB1.1
● Outline dimensions: 212mm×80mm×32mm

Error and repeatability of displayed value:

No.	Impact Device Type	Hardness value of Leeb/ standard hardness block	Error of displayed value	Repeatability
1	D	760±30HLD 530±40HLD	±6 HLD ±10 HLD	6HLD 10HLD
2	DC	760±30HLD 530±40HLD	±6 HLDC ±10 HLDC	6HLD 10HLD
3	DL	878±30HLD 736±40HLD	±12 HLDL	12HLDL
4	D+15	766±30HLD 544±40HLD	±12 HLD+15	12HLD+15
5	G	590±40HLD 500±40HLD	±12 HLG	12HLG
6	E	725±30HLD 508±40HLD	±12 HLE	12HLE
7	C	822±30HLD 590±40HLD	±12 HLC	12HLC

Configuration

	No.	Item	Quantity	Remarks
Standard Configuration	1	Main uni	1
	2	D type impact device	1	With cable
	3	Standard test block	1
	4	Cleaning brush (I)	1
	5	Small support ring	1
	6	Battery Charger	1	9V 500mA
	7	Paper for printing	1
	8	Manual	1
	9	Instrument package case	1
Optional Configuration	11	Cleaning brush (II)	1	For use with G type impact device
	12	Other type of impact devices and support rings		Refer to Table 3 and Table 4 in the appendix.
	13	DataPro software	1
	14	Communication cable	1

Pressure Manometer

Applications: This unit is widely used in measuring fan pressure, wind speed, oven pressure and hydraulic system. It can also be used controlling the gas ratio in combustion and valve control, monitoring blood pressure, breath pressure with other medical device.
Features: 1. With 11 units to select: Bar, mBar, kPa, Kgf/cm², mmHg, cmH2O, Ozf/in², psi, inHg, inH2O, ftH2O. 2. USB port allows you to connect with computer.
Model	AMF031	AMF032	AMF033
Measuring Range	±10kPa		±35kPa
Display	LCD Display
Accuracy	±0.3% FSO (25℃)
Repeatability	±0.2% (Maximum ±0.5% FSO)
Max Pressure	50kPa		150kPa
Response Time	Typical 0.5s
Low Battery Indications	YES
Temperature Compensation	NO	YES
Up Overload Positive Alert	Err.1
Up Overload Negative Alert	Err.1
Operating Temperature	0~50℃
Storage Temperature	-10~60℃
Power	4 x AAAA
USB Interface	YES

Pressure Manometer / Air Pressure Gauge AMF109

Features:
1. 11 selectable units of Measure
2. Max/min/average, and with a relative time
3. Large LCD Back light dual display
4. Zeroing, offset and data compensation
5. Low battery display and automatic shutdown
6. Data Hold and Error code

Specifications:
1. Range & Resolution:
1) InH2O: ±55.40/0.01
2) Ozin²: ±32.00/0.01
3) Psi: ±2.000/0.001
4) ftH2O: ±4.612/0.001
5) Mbar: ±137.8/0.1
6) cmH2O: ±140.6/0.1
7) Kpa: ±13.79/0.01
8) kgcm: ±0.140/0.001
9) inHg: ±0.407/0.001
10) Bar: ±0.137/0.001
11) mmHg: ±103.4/0.1
2. Display: Dual LCD
3. Accuracy: 0.3% FSO (25°C)
4. Repeatability: 0.2% (Max 0.5%FSO)
5. Linearity/Hysteresis: 0.29% FSO
6. Maximum Pressure: 10PSI
7. Response Time: 0.5s Typical
8. Low Range Indicator: Err.1
9. Under Range Indicator: Err.2
10. Operating conditions: 32°F to 122 °F (0 to 50°C)

Belt Tension Tester BTT-2880

Application:
Main used in belt tension measurement, can also be applied to measure the tension of objects such as tapes, wires. Widely applied in industries of automobile, textile, cables, wires, plastic films, paper, printing.
Measuring range: 0-750N; 0-120lb; 0-77Kg; 0-114Seems
Accuracy: ≤±5%
Belt state indication: Low, OK, Hi
Resolution: ±1N (or1 least significant digit of other units)
Belt width: ≤36mm
Overload alarm: 750N
Max. load: 850N
Metric/Imperial
Auto power off
Pc interface: RS-232C
Power supply: 4×1.5V AAA(UM-4)
Operating condition: 0 ~ 50ºC, <85% RH
Dimension: 135×62×33mm (5.3×2.4×1.3inch)
Net weight: 335g(not including batteries)
Optional Accessories: Cable and Software for RS-232 and USB

Fuel Pressure Meter FPM-2680

Simple-to-use digital meter indicates diesel
fuel pressure. Connect to battery terminals and
fuel pressure sensor signal wire and digital
display will show current fuel pressure and, if
required, maximum pressure detected.

Throttle Potentiometer Tester TPT-2690

Fast diagnosis of a common electronic fault.
Simple-to-use digital meter indicates throttle
position sensor output voltage. Connect to
battery terminals and sensor signal wire and
digital display will show output voltage as a
percentage.

Digital Screen Tension Meter HT-6510N

Applications： 1. Suitable for general wire mesh tension and steel mesh tension measurement. 2. Suitable for screen printing and screen stencil measurement, high accuracy. The ideal and necessary tool for production of precise screen and steel mesh. Can avoid the personal or tactile measurement error. 3. LCD digital display, eliminating reading error. 4. Use USB data output and RS-232 data output to connect with PC. 5. Optional Bluetooth and data output.
Specifications: 1. Measurement Range: 0~60N/cm 2. Resolution: 0.1 3. Operating Environment: Temperature: 0 ~ 40ºC, Humidity: 10 ~ 90%RH 4. Power Supply: 4 x 1.5V AAA Size (UM-4) Battery 5. Dimensions: 175 x 95 x 40mm 6. Weight: 490g (Not Including Batteries)
Commonly Used Screen Maximum Tension: Data in the table is based on testing condition of Swiss thick gauze. Concrete data depends on the quality of network machine. With good quality network machine, the gauze will not crack even in the highest tension. but if it exceeds the maximum tension, the gauze crackes easily, please reference when trapping net.

		Maximum Tension	Regulating Pressure
77T	200 mesh	30N/cm	7kg/cm
90T	230 mesh	25N/cm	6.5kg/cm
100T	250 mesh	23N/cm	6kg/cm
120T	300 mesh	21N/cm	5.7kg/cm
140T	350 mesh	20N/cm	5.3kg/cm
165T	420 mesh	18N/cm	5kg/cm
Note: The above data is the reference data in the use of a factory pneumatic net machine, the specific operation according to actual circumstances.

Printing Task and Determination of Screen Tension
Wire Mesh	Printing Task	Tension (N/cm)
Ultra High Tension Wire Mesh	Circuit Board and Measuring Scale	16~20
High Strength Wire Mesh	Multicolor and Four-Color Printing (Mechanical Printing)	16~20
High Precision Ultra Fine Wire Mesh	High Precision Multi Layer Circuit Printing	25~30
High Precision Polyester Net (Standard Monofilament)	Multicolor and Four-Color Printing (Manual Printing)	8~12
Ordinary Polyester Net (Standard Monofilament)	Flat Object	8~12
Nylon Mesh	Curve Surface or Rough Object	8~12